Poly bushes.

Hi Guys,
On the above...while building my mid-engine I designed the new rear off my chassis to accept standard Renault wishbones...I then made new jigs & fabricated tubular ..similar to DC,s but with rose-joints inboard & poly. bushes red-spec:race: outboard..tops are poly inboard with single rose-joint top... I have just built a set off fully poly bushed & will be installing them on my normal GTA in the next weekor so...will let you know how they work.

Cheers Eddie.

[stephendell]

Photos please

Steven,

this old fart is not yet in the digital age...I have a 100 or more photo,s of me building the mid-engine & of the wishbones....If I send them by normal mail to you can they be digitised then put on the club web.

Cheers Eddie.

Eddie, sounds like you are doing a proper job, none of this touchy-high-tech-digi-stuff.
Look forward to seeing your car at a meet soon, this year ???
Simon.

Simon,
I think this year is a bit.....I still have all the front-end to redesign.....wait till you see the rear...I know PHOTO,S....There is no hi-tech on the car ..doors open a la. 610 All cables have been replaced with a loom from a well known mid-engined kit car maker...dash remodeled similar to 110 everything simple & straightforward Old-school ....nothing to go wrong.

Cheers Eddie.

[stephendell]

I have a 100 or more photo,s of me building the mid-engine & of the wishbones....If I send them by normal mail to you can they be digitised then put on the club web.

Yes, no problem at all.

Steve,

They will be on there way over the weekend.

Cheers Eddie.