Megasquirting my 604

Chat about VENTURI, Delorean & Kitcars

no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Re: Megasquirting my 604

Postby MFaulks » Mon Jan 28, 2013 8:07 pm

Alpineandy wrote:And it'll have the 'Odd Fire' 2664 engine.


.. right right :-) needed to engage brain! Yes odd-fire...

Yep, as Mr Metters says, the quick and dirty is to use the MS for batch fire fuel, still easier with the 12V 3ltr auto "flywheel / starter ring", whilst retaining the existing ignition setup for sparks. I can’t remember the MS handling odd-fire, but may be the case now?

You could alternatively change to a 6R4 ecu that is designed for odd-fire; will need a crank timing and cam position sensor, and you can then have sequential fuelling and twin coil spark setup... If you fancy that, then I have all the kit waiting for a good home 8)
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
no avatar
User

dieselnutjob

Rank

Non Member

Posts

10

Joined

Sat Aug 20, 2011 2:49 pm

Location

Ruislip, London, UK


Has thanked: 0 time
Been thanked: 0 time

Postby dieselnutjob » Tue Jan 29, 2013 9:05 am

MS Extra firmware can do odd fire
see
http://www.msextra.com/doc/ms2extra/MS2 ... tm#oddfire

It can also do "twin dizzy" which will work with the 604 dual points/dual coil setup. It only has one distributor but logically it is two as it has two king leads and the rotor arm has two contacts.

It will be nice to retain the wierdness. Also it means that if something goes wrong you can limp home on three cylinders.
Peugeot 604 SL
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Tue Jan 29, 2013 11:29 pm

.
Yes agree :-) I like it, sounds great! Worth sneaking some decent cams in there, and long branch smallish bore 3-1 headers :-)
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
no avatar
User

dieselnutjob

Rank

Non Member

Posts

10

Joined

Sat Aug 20, 2011 2:49 pm

Location

Ruislip, London, UK


Has thanked: 0 time
Been thanked: 0 time

Postby dieselnutjob » Tue Jan 29, 2013 11:33 pm

I sent a PM to clee to see if he wants to sell me a flywheel. No reply yet :(
Peugeot 604 SL
no avatar
User

dieselnutjob

Rank

Non Member

Posts

10

Joined

Sat Aug 20, 2011 2:49 pm

Location

Ruislip, London, UK


Has thanked: 0 time
Been thanked: 0 time

Postby dieselnutjob » Thu Feb 14, 2013 4:11 pm

I think that I found a solution.

At the bottom of the bellhousing on a 604 there is a little plate that covers the bottom inch or two of flywheel.

If I get a replacement standard flywheel I can drill a series of holes in the back of the flywheel, maybe 4mm deep or so (?) and then make a replacement cover plate which holds a hall effect sensor so that the holes pass over the tip of the sensor.

Anyone see a problem with this?
Peugeot 604 SL
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Sat Feb 23, 2013 10:09 am

.
All sounds good, except I would use a VR sensor instead than hall ie the OEM type sensor. The drillings do need to be about 10mm ish diameter to reduce edge effects and alising; so just make them as big diameter as you can. Great stuff, look forward to hearing more :-)

Martin
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

Paul Taylor

Rank

Non Member

Posts

384

Joined

Fri Nov 20, 2009 9:03 pm

Location

Reading, Berkshire


Has thanked: 0 time
Been thanked: 1 time

Postby Paul Taylor » Sat May 18, 2013 9:47 pm

dieselnutjob wrote:except that it only makes 130bhp
When I looked at an Alpine at Vie en Blu the only difference that I could see was that the Alpine seems to have a much nicer exhaust manifold than the 604


Sounds like the same engine my dad used to have in his 77 R30 TS.
That was the 2664cc with 2 Orrible Carbs. 120bhp ish.

Could you not go for the same setup as a R30 TX. Which was Bosch K Jetronic on the 2664cc. That was rated at 150bhp and was reasonable on fuel. I had one in my younger years. Fairly simple configuration.
2016 Mercedes A200d 2.2 AMG, 7sp DCT.
2003 Renault Laguna II 3.0 24v V6 Diamonique Auto.
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Postby Alpineandy » Mon May 20, 2013 1:10 pm

Paul Taylor wrote:Sounds like the same engine my dad used to have in his 77 R30 TS.
That was the 2664cc with 2 Orrible Carbs. 120bhp ish.


I thought the early 30 had the single carb twin choke or later the A310 3 choke set up being a single plus a single with 2 vacuum driven chokes.
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
User avatar
User

Paul Taylor

Rank

Non Member

Posts

384

Joined

Fri Nov 20, 2009 9:03 pm

Location

Reading, Berkshire


Has thanked: 0 time
Been thanked: 1 time

Postby Paul Taylor » Mon May 20, 2013 2:23 pm

I just called my dad to ask him, since he likes talking about old cars ;-)

He said the 30TS had one small carb, and then a double Webber for when you put your foot down.
He commented that it "Ran like a pig when cold", and Never run right.

Sound similar to the 2.8 V6 GTA. !
2016 Mercedes A200d 2.2 AMG, 7sp DCT.
2003 Renault Laguna II 3.0 24v V6 Diamonique Auto.
User avatar
User

JohnC

Rank

Non Member

Posts

2120

Joined

Sun Dec 02, 2007 6:19 pm

Location

Jersey C.I.


Has thanked: 15 times
Been thanked: 83 times

Postby JohnC » Mon May 20, 2013 2:29 pm

Paul Taylor wrote:He commented that it "Ran like a pig when cold", and Never run right.

Sound similar to the 2.8 V6 GTA. !

Don`t you believe it. :evil: :evil: :evil: ....... :wink:
1990 GTA Atmo, 2003 Jaguar X type 2.5SE Auto, 2018 Kia Picanto GT-Line-S 1.25
User avatar
User

Paul Taylor

Rank

Non Member

Posts

384

Joined

Fri Nov 20, 2009 9:03 pm

Location

Reading, Berkshire


Has thanked: 0 time
Been thanked: 1 time

Postby Paul Taylor » Mon May 20, 2013 2:50 pm

Going back to the K-Jetronic theme.(aka R30TX) GTA V6 vin number 21 (1st production GTA ?). Went to the USA, and it had K-Jetronic.

Its on this site, in members cars, USA.
Image
2016 Mercedes A200d 2.2 AMG, 7sp DCT.
2003 Renault Laguna II 3.0 24v V6 Diamonique Auto.
Previous


  • Advertisement

Who is online

Users browsing this forum: No registered users and 17 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France