GTA wheel nuts - taper problems

Club Members can advertise items here

Moderators: eastlmark, Test Moderator

User avatar
User

Simon_Wej

Rank

Non Member

Posts

27

Joined

Mon Sep 05, 2016 2:36 pm

Location

Oxford


Has thanked: 6 times
Been thanked: 0 time

GTA wheel nuts - taper problems

Postby Simon_Wej » Mon Jan 22, 2018 2:48 pm

Hi....I recently bought some wheel spacers for my GTA....it's running original wheels.

The rear spacer is fine and re-uses the original bolts (M12 x 1.5mm, 26mm thread length, 19mm bolt head, 45 degree taper).

The problem is the front wheels....with the 12mm spacer in place, the original bolts are now too short and I need bolts with a 40mm thread length. Easy enough you might think, but virtually every wheel bolt out there has a 60 degree taper, not 45 degree :down .

So.....does anyone know where I can buy 45 degree taper wheel bolts, ideally 40mm length but I can cut longer ones down?

Or is it a case of buying 60 degree taper bolts and getting them machined to a 45 degree taper?

Any help much appreciated! Thanks, Simon
Silver GTA V6 Turbo
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7462

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Re: GTA wheel nuts - taper problems

Postby stephendell » Mon Jan 22, 2018 6:21 pm

You will also see them referred to as 90 degree. Popular in France
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart


  • Advertisement

Who is online

Users browsing this forum: No registered users and 21 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France