Dump valve

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

User avatar
User

orbut12

Rank

Non Member

Posts

203

Joined

Fri Nov 19, 2004 8:27 pm

Location

Edinburgh


Has thanked: 0 time
Been thanked: 0 time

Dump valve

Postby orbut12 » Thu Jun 02, 2005 8:05 pm

Anyone tell me whats the best dump valve for an A610?want a nice loud one not the recirculation type thats fitted
User avatar
User

Tony Smith

Rank

Non Member

Posts

1407

Joined

Fri Apr 16, 2004 4:50 pm

Location

Kent


Has thanked: 0 time
Been thanked: 19 times

Bailey Piston Type

Postby Tony Smith » Thu Jun 02, 2005 10:37 pm

Bailey do a very nice proper piston type stainless steel one. Can get either type. Stay away from the diaphram types they are usually unreliable
Alpines - GTA 3.0 Turbo, GTA 3.0 Inj (Project DD), GTA 6.2 V8 (500 bhp) , R32 Skyline GTR, BMW Alpina B10 635 Highline, Alpina B10 E39 5 Series, Jaguar 4.2 XKR, Laguna 205GT, BMW 120d.
User avatar
User

orbut12

Rank

Non Member

Posts

203

Joined

Fri Nov 19, 2004 8:27 pm

Location

Edinburgh


Has thanked: 0 time
Been thanked: 0 time

Postby orbut12 » Fri Jun 03, 2005 5:45 am

Thanks, a bailey piston type it is then,it looks an easy fit,but is there anything i should know?
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Fri Jun 03, 2005 6:22 am

I installed a bailey dump valve, £90 (delivered from ART), recirculating type as it's better for performance and keeping the turbo boost available quicker. But you can just leave it's output side open to the atmosphere and enjoy the whooshing if you wish to.

It was only after instlling a calibrated boost gauge that it was clear that the old bosch diaphram dump valve was leaking.
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

orbut12

Rank

Non Member

Posts

203

Joined

Fri Nov 19, 2004 8:27 pm

Location

Edinburgh


Has thanked: 0 time
Been thanked: 0 time

Postby orbut12 » Fri Jun 03, 2005 3:26 pm

I defo like a bit woosh and a chirp so think I'll go for the atmospheric type!
Is there an after market stainless for an A610?That does awy with the Cat
I've heard the one on the GTA turbo and i would love mines to sound like that 8)
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Postby Alpineandy » Fri Jun 03, 2005 4:13 pm

orbut12 wrote:Is there an after market stainless for an A610?That does awy with the Cat


You really need to look at the ARR and ART web-sites (in the links section). :wink:
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Fri Jun 03, 2005 4:15 pm

I do an aftermarket stainless steel exhaust for the 610, its £495 but the sound is not much different from the original. Its mainly to be a high quality replacement. Doesn't remove the cat though. Cat replacement pipe is £125.00
Image
User avatar
User

Tony Smith

Rank

Non Member

Posts

1407

Joined

Fri Apr 16, 2004 4:50 pm

Location

Kent


Has thanked: 0 time
Been thanked: 19 times

ARR site down

Postby Tony Smith » Fri Jun 03, 2005 5:06 pm

The Alpine Renault Restoration site is down at the moment, I'm in the process of revamping the site and swapping ISP's. I know Paul does A610 exhausts and CAT replacements, give him a call if you want a price.
Alpines - GTA 3.0 Turbo, GTA 3.0 Inj (Project DD), GTA 6.2 V8 (500 bhp) , R32 Skyline GTR, BMW Alpina B10 635 Highline, Alpina B10 E39 5 Series, Jaguar 4.2 XKR, Laguna 205GT, BMW 120d.
User avatar
User

orbut12

Rank

Non Member

Posts

203

Joined

Fri Nov 19, 2004 8:27 pm

Location

Edinburgh


Has thanked: 0 time
Been thanked: 0 time

Postby orbut12 » Sat Jun 04, 2005 5:36 am

I'm not in a rush for the exhaust,was just wondering if it was possible to remove the cat,get some extra power and a bit of a rumble,i've got a few more important issues to sort first!Thanks for the replys though!
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Postby mettersl » Sat Jun 04, 2005 10:04 am

Hi ,
If you bought the A610 from E-bay in Dumfries,when you remove the CAT, you'll need to keep it for the MOT. I think that car was 1994 (L) and if the car is (I think) later than 1992 it will need the cat back on for the emissions test! So make sure you get an exhaust that allows you to refit it for the annual inspection.
Between times you'd need to be very unlucky to run into the mobile emissions test check points- most councils have stopped funding them- unless someone here knows better. There were scare stories in the press a couple of years ago, but I've not heard anything recently.
BTW what did you pay for the A610?

Cheers
Lee
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Sat Jun 04, 2005 11:26 am

orbut12 wrote:I defo like a bit woosh and a chirp so think I'll go for the atmospheric type!
Is there an after market stainless for an A610?That does awy with the Cat
I've heard the one on the GTA turbo and i would love mines to sound like that 8)


It most likely that youve probably heard one of my race twin systems on the GTA. Ive done a prototype system similar on the A610, without the cat either, but it seem to affect the performance as much as on the GTA, as the turbo on the A610 is much, much larger and doesnt restrict the exhaust, and the sound at idle was much quieter due to the lower compression of the 3.0 engine..It was still nice and burbly though.. :D
Image
User avatar
User

orbut12

Rank

Non Member

Posts

203

Joined

Fri Nov 19, 2004 8:27 pm

Location

Edinburgh


Has thanked: 0 time
Been thanked: 0 time

Postby orbut12 » Sat Jun 04, 2005 4:24 pm

Hi ,
If you bought the A610 from E-bay in Dumfries,when you remove the CAT, you'll need to keep it for the MOT. I think that car was 1994 (L) and if the car is (I think) later than 1992 it will need the cat back on for the emissions test! So make sure you get an exhaust that allows you to refit it for the annual inspection.
Between times you'd need to be very unlucky to run into the mobile emissions test check points- most councils have stopped funding them- unless someone here knows better. There were scare stories in the press a couple of years ago, but I've not heard anything recently.
BTW what did you pay for the A610?


Thats the one i bought and i know all about the Cat situation,i was just going to keep the one i take off and use it as required(mot and if i get pulled) Price wise i did'nt get it cheap considering the faults it has but TBH once i seen it nothing would have stopped me having it


Ive done a prototype system similar on the A610, without the cat either, but it seem to affect the performance as much as on the GTA, as the turbo on the A610 is much, much larger and doesnt restrict the exhaust, and the sound at idle was much quieter due to the lower compression of the 3.0 engine..It was still nice and burbly though..


If you put it up for sale I'll be at the front of the queue 8)


  • Advertisement

Who is online

Users browsing this forum: Majestic-12 [Bot] and 45 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France